Radhekrishna Extrusions manufactures single screws and barrels starting from 20 mm to 150 mm screw diameter.
• Pipe Plant
• Sheet Plant
• Film Plant
• Cable Manufacturer (Any Type of Materials)
• Compounding Plant
• Injection Moulding Machinery
• Blow Moulding Machinery
• Any type of Plastic Pallet Manufacturing
The grooved feed barrel is used for achieving high shear and better transportation of material. As Co-efficient of friction between granules and screw and barrel should be higher to get proper melting of the material, it’s imperative to have grooved feed in the barrel for processing of polymers of Olefin group.
The barrier screw design separates melted material from unmelted solid material into separate channels. This unique mixing feature thoroughly homogenizes the melt with little or no increase in its average temperature. Mixing is achieved with an undulating root profile in the metering zone of the screw.
Maddoc barrier screw is used to break down particles by forcing material to flow over barrier flights, in a similar manner to barrier screws.
© 2019 Radhekrishna Extrusions | All rights are reserved
Last updated by Vinseo By 30 July 2019